You are here: Home > Measuring Instruments
Sort By:
Page of 1
4-20mA Amp Probe
4-20mA Amp Probe

Sale Price: (Members Only)

INTRODUCING OUR NEW STYLE AMP PROBE


The OmniSite Amp Probe will monitor AC motor amperage from 0-50, 0-100, or 0-200 amperes. The sensor outputs a 2-wire, 4-20mA signal. The sensors are a solid-core, where the conductor runs through the sensor. Amp probes are not needed to calculate pump on/off cycles and runtime, but are recommended to display pump amperage. Works only with the Crystal Ball product. Please call into our sales department, 317-885-6330 ext.4, with any questions.
Current Switch
Current Switch

Sale Price: (Members Only)

This split core current sensing switch monitors motor current (amperage) in the conductor passing through it. The sensor has a fixed trip point at 150 mA AC max (200 mA for 50 Hz).

Eliminates the expertise needed to correctly wire-in to a motor control circuit by merely inserting the probe onto a "hot" leg of the motor and then wiring to any OmniSite RTU input.

This current switch can be used with any OmniSite unit to indicate "positive proof" when a motor is running or stopped.
Explosion Proof I-Level
Explosion Proof I-Level

Sale Price: (Members Only)

The I-Level from OmniSite is a next generation level transmitter for measuring water levels in sewage pumping stations, wells, and tanks. It's all stainless-steel design incorporates a highly clog resistant diaphragm protected by heavy-duty stainless steel weight. The explosion proof design is ideal for areas that have the potential for the build-up of explosive gases. The 0-20ft. factory calibrated range of the I-Level is optimized for use with the OmniSite Crystal Ball product in a lift station application, however it can be used in any application that accepts a 4-20mA output signal.
High Level Float Switch
High Level Float Switch

Sale Price: (Members Only)

This non-mercury series, normally-closed float switch can be utilized to signify specific water levels or for direct alarm activation.  The durable construction provides for leak-proof operation and tremendous impact resistance.  Supplied with normally closed contacts.  Float comes standard with Viper Kit without need to order, or can be ordered as an accessory for all other products.
Rain Gauge
Rain Gauge

Sale Price: (Members Only)

The Rain Gauge is a tipping bucket style rain collector.  Once the rain gauge measures .01" of rain the gauge will tip and close the contact closure.  The enclosure is made of a UV-stabilized ABS plastic.  Works only with XR50 and Crystal Ball (must be connected to Input #5).